Service Menu Code TV
SERVICE MENU CODE is the code to enter into the condition "SERVICE MODE". In terms of repairing the aircraft televisiada several ways, including by using code numbers or letters or even a combination of both. Another way is to use hardware tricks instantaneous manner at the point men-short/jumper / or switches on the reply provided (sharp, panasonic, Thomson, phillips etc.).
Here I will give some way / code to open the service menu of some generality television brands available in Indonesia, of course, tv output planes starting in 2000 until now, because most manufacturers only have to modify its features.
SERVICE MENU CODE is the code to enter into the condition "SERVICE MODE". In terms of repairing the aircraft televisiada several ways, including by using code numbers or letters or even a combination of both. Another way is to use hardware tricks instantaneous manner at the point men-short/jumper / or switches on the reply provided (sharp, panasonic, Thomson, phillips etc.).
Here I will give some way / code to open the service menu of some generality television brands available in Indonesia, of course, tv output planes starting in 2000 until now, because most manufacturers only have to modify its features.
TOSHIBA: In remote press MUTE once, then click again and hold MUTE + MENU on TV. Repeat for next process press MENU in remote number 4,7,2,5 - click VOL (-) in the TV press and HOLD NUMBERS 9.
SANYO: MENU in remote + VOLUME UP TV
LG FLATRON: Press OK at remote + OK in TV + remote MENU or MENU on TV
PHILIPS: TV STNDBY position, press 0, 6, 2, 5, 9, MENU
POLYTRON: TV STANDBY position, click and hold the MENU to the TV remote code number input 1013.
PANASONIC: Short (Connect Moment) pin 'FA-1' TO 'FA-2' or TP-8 to ground
PANASONIC TX SERIES: click VOL (-) in TV + OSD
SHARP: short leg (pin) pin 6 and 7 on instaneous MCU IC (TDA 98XXX). Back to out short again.
SHARP EXPRESSION: Connect pins or two wire/jumper J800 (next on tuner beside) PCB has been delivered and
two jumper parallel.
AKARI: Press SLEEP in remote + MENU TV
SAMSUNG: Standby position click on remote: MENU - PSTD - MUTE - POWER ON
Samsung Plano: position standby, click in the remote: DISPLAY-MENU-MUTE-POWER ON
SAMSUNG DIGITAL Plano HD100: standby-DISPLAY-MENU-MUTE-POWER
or Standby-MUTE-1-8-2-POWER ON
JVC: Press and hold the same OSD + MUTE press and hold or OSD + PICTURE.
HITACHI: Press and hold the AVDI TV, turn on the TV POWER SWITCH.
SONY: standby-OSD - 5 - VOL (-) - POWER ON.
RCA / THOMSON: Press and hold button in VT TV + POWER SWITCH ON TV.
AIWA: The repairs MENU button inthe remote above VOLUME (+), loading notice.
TCL: Press DISPLAY (OSD) in remote + VOLUME DOWN in TV, hold 3 seconds.
Crystal: TV STNDBY position, click VOLUME UP + VULUME DOWN together and hold on TV simultaneously TV ON.
AKIRA, FUJITEC, BOOMBA:Brand China and some other using the course type LC8632XX IC series: click MENU ON remote twice - Recall (Q. VIEW) - MUTE.
TV CHINA other (KCL, MITOCHIBA, BAZZOMBA):
click to VOLUME in TV remote NUL. Press RECCAL at once, press and hold VOLUME (-) in TV along with press RECCALin remote. repeated the process to enter into further sub-menu up to a position outside the service menu.
No comments:
Post a Comment